Hexton Technologies

Glass Passivated Triacs in a plastic envelope, intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. Typical applications include motor control, industrial and domestic lighting, heating and static switching.

Electrolytic Capacitors are generally used in DC power supply circuits due to their large capacitance's and small size to help reduce the ripple voltage or for coupling and decoupling applications.

Ai Thinker NF-03 Wireless Transceiver is a 2.4G wireless module with a small size and on-board antenna. It has a high airspeed (up to 2Mbps), an SPI interface, and a pure hardware module. It has high stability, high-cost performance, and good spectrum test characteristics. , small size, using all industrial-grade components.

Ai Thinker NF-01-S Wireless Transceiver is a 100mW power 2.4G wireless module, high-altitude rate (up to 2Mbps), using SPI interface, send and receive in one pure hardware module; high stability, cost performance, Volume, use of all-industry components.

A resistor is an electrical component that limits or regulates the flow of electrical current in an electronic circuit. Resistors can also be used to provide a specific voltage for an active device such as a transistor.

The most common modern type of varistor is the metal-oxide varistor (MOV). This type contains a ceramic mass of zinc oxide grains, in a matrix of other metal oxides, such as small amounts of bismuth, cobalt, manganese oxides, sandwiched between two metal plates, which constitute the electrodes of the device.

Additional Information:

• Item Code: S14-K460K1-0728

A Surface-Mounted Diode is a type that emits light and that's mounted and soldered flat against a circuit board. In this respect, it's quite unlike standard LEDs which rely on wire leads to hold them in place

A crystal oscillator is an electric oscillator type circuit that uses a piezoelectric resonator, a crystal, as its frequency-determining element. Crystal is the common term used in electronics for the frequency-determining component, a wafer of quartz crystal or ceramic with electrodes connected to it

Digital capacitive Touch Switch Module- TTP223B Voltage Range: 2V to 5V DC