Hexton Technologies

L7805CV/L7806CV/7808CV/7809CV/7810CV/7812CV/7815/7818CV/7824CVis a three terminal linear voltage regulator IC with a fixed output voltage of 5V which is useful in a wide range of applications.

Additional Information:

• Production Capacity: 100000
• Delivery Time: IN STOCK
• Packaging Details: CORRUGATED BOXES

The Buck switching regulator is a type of switch mode power supply circuit that is designed to efficiently reduce DC voltage from a higher voltage to a lower one, that is it subtracts or “Bucks” the supply voltage, thereby reducing the voltage available at the output terminals without changing the polarity.

The L79xxC series of three-terminal negative regulators is available in TO-220, TO-220FP and D²PAK packages and several fixed output voltages, making it useful in a wide range of applications. These regulators can provide local on-card regulation, eliminating the distribution problems associated with single point regulation; furthermore, having the same voltage option as the L78xx positive standard series, they are particularly suited for split power supplies. If adequate heat sinking is provided, they can deliver over 1.5 A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents.

LM339 is used in applications where a comparison between two voltage signals is required.

The LM393 is a dual independent accuracy voltage integrated circuit operated with single or else split supply.

The 24C08 / 24C16 provides 8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 1024/2048 words of 8 bits each The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential.

The 24C02 are 2K bit electrically erasable programmable memories (EEPROM), organized as 256 x 8 bits.

The 24C04 is a two-wire, 8-pin serial EEPROM IC. EEPROM stands for Electrically Erasable Programmable Read-Only Memory.

24C32 is a 4K x 8 (32Kbit) Serial Electrically Erasable PROM.

The M24C64 is a 64-Kbit I2C-compatible EEPROM (Electrically Erasable PROgrammable Memory) organized as 8 K × 8 bit

The 24C128 provides 131,072/262,144 bits of serial electrically erasable and programmable read only memory (EEPROM) organized 

The 24LC256 is a 32K x 8 (256 Kbit) Serial Electrically Erasable PROM, capable of operation across a broad voltage range (1.7V to 5.5V).

Additional Information:

• Production Capacity: 100000
• Packaging Details: CORRUGATED BOXES

A power management integrated circuit (PMIC) is used to manage power on an electronic devices or in modules on devices that may have a range of voltages. The PMIC manages battery power charging and sleep modes, DC-to-DC conversion, scaling of voltages down or up, among others.

The operational amplifier or op amp is an electronic device or element, that behaves like a voltage controlled voltage source. An op amp is a complex electronic device, which consists of resistors, capacitors, transistors and diodes. It is commercially available in integrated circuit form.

Additional Information:

• Production Capacity: 100000
• Delivery Time: 2-3 DAYS

Fast Current Gauge IC with Ultra Low Loss Sense Element and PWM Output. Fast Current Gauge IC with Ultra Low Loss Sense Element and PWM Output.

Fast Current Gauge IC with Ultra Low Loss Sense Element and PWM Output. Maker. 

UC3845 

• Optimized for off-line and DC-to-DC converters
• Low start-up current (< 1 mA)
• Automatic feedforward compensation
• Pulse-by-pulse current limiting
• Enhanced load-response characteristics
• Undervoltage lockout with hysteresis
• Double-pulse suppression
• High-current totem-pole output
• Internally trimmed bandgap reference
• Up to 500-kHz operation
• Error amplifier with low output resistance

UC 3844 Adjustable Switching Frequency, Current Limiting, Dead Time Control, Error Amplifier, Multi-topology.

UC3843 20V, 1-A, Low current 1MHz current mode PWM controller with 8.4V/7.6V UVLO 100% duty cycle 0C to 70C.

UC3842 Adjustable Switching Frequency, Current Limiting, Dead Time Control, Error Amplifier

TL494 is a PWM controller IC used for power electronics circuits. It comprises of on-chip two error amplifiers an oscillator with adjustable frequency feature, an output flip-flop having pulse steering control, and an output control circuit with feedback.

 The SG3524 incorporates on a single monolithic chip all the function required for the construction of regulating power suppies inverters or switching regulators. 

SG3525 is a PWM controller IC and is used in most inverters. It has two PWM outputs and a built-in totem pole base PWM driver. 

Additional Information:

• Production Capacity: 100000
• Delivery Time: 2-3 DAYS

A logic IC is a semiconductor device that implements a basic logical operation that is performed on one or more digital input signals (represented by 1 and 0 or H and L) to produce a digital output signal.

Additional Information:

• Production Capacity: 100000
• Delivery Time: 2-3 DAYS

A logic IC is a semiconductor device that implements a basic logical operation that is performed on one or more digital input signals (represented by 1 and 0 or H and L) to produce a digital output signal.

Additional Information:

• Production Capacity: 100000
• Delivery Time: 2-3 DAYS

A logic IC is a semiconductor device that implements a basic logical operation that is performed on one or more digital input signals (represented by 1 and 0 or H and L) to produce a digital output signal.

Additional Information:

• Production Capacity: 100000
• Delivery Time: 2-3 DAYS

LM324-These devices consist of four independent, high-gain, frequency-compensated, operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages.

The LM358B and LM2904B devices are the next-generation versions of the industry-standard operational amplifiers (op amps) LM358 and LM2904, which include two high-voltage (36 V) op amps. These devices provide outstanding value for cost-sensitive applications, with features including low offset (300 µV, typical), common-mode input range to ground, and high differential input voltage capability.

The µA741 device is a general-purpose operational amplifier featuring offset-voltage null capability.The high common-mode input voltage range and the absence of latch-up make the amplifier ideal for voltage-follower applications.

The RC4558 device is a dual general-purpose operational amplifier, with each half electrically similar to the µA741, except that offset null capability is not provided.

The operational amplifier or op amp is an electronic device or element, that behaves like a voltage controlled voltage source. An op amp is a complex electronic device, which consists of resistors, capacitors, transistors and diodes. It is commercially available in integrated circuit form.

Additional Information:

• Production Capacity: 100000
• Delivery Time: 2-3 DAYS

NE555-These devices are precision timing circuits capable of producing accurate time delays or oscillation.

NE556-For stability Runs as an oscillator with accurate free-running frequency and duty cycle Controlled by two external resistors and one capacitor.